[2022] Use Valid Exam HPE6-A81 by GetValidTest Books For Free Website
Free HPE Aruba Certified HPE6-A81 Official Cert Guide PDF Download
HP HPE6-A81 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
NEW QUESTION 13
While configuring the service rule conditions which NAS-Port-Type value should be used to differentiate the service for wired and wireless authentication?
- A. Ethernet (19) and Wireless-802 11(18)
- B. Ethernet (15) and Wireless-802 II (19)
- C. Ethernet (5) and Wireless-802 11 (9)
- D. Ethernet (O)and W.reless-802 11 (1)
Answer: C
NEW QUESTION 14
Refer to the exhibit.
The customer configured a guest operator access by creating a custom operator profile and the built-in universal ClearPass profile mapping translation rule. When he tests the setup, he gets authentication failed. Using the streenshots sent by the customer as a reference, what would suggest to the customer to fix the issue?
- A. To correct the case sensitive attribute name in the enforcement profile to admin_privileges
- B. To map the operator profile name HS_Receptionist in the translation rule value field
- C. To verify if the username Mike07 has the Active Directory Title attribute set as Reception.
- D. To re-enter the correct username and password for the Active Directory user Mike07.
Answer: B
NEW QUESTION 15
Refer to the exhibit.
A customer is trying to configure a TACACS Authentication Service for administrative what could be the reason for the Login Status REJECT?
- A. The Read-only Administrator role does not exist on the Controller.
- B. The Enforcement profile used is not a TACACS profile.
- C. The password used by the administrative user is wrong.
- D. The Enforcement profile is not designed to be used on Aruba Controller
Answer: A
NEW QUESTION 16
What is used to validate the EAP Certificate? (Select two.)
- A. SAN entries
- B. Date
- C. Key usage
- D. Server Identity
- E. Common Name
Answer: A,C
NEW QUESTION 17
Refer to the exhibit.
You configured a new Wireless 802.1 X service for a Cisco WLC broadcasting the secure-AOM-5007 SSID. The client fails to connect to the SSIO. Using the screenshots as a reference, how would you fix this issue?
- A. Change the service condition to Radius:lETF Calling-Station-Id EQUALS Secure-ADM-5007
- B. Make sure that the Network Devices entry for the Cisco WLC has a vendor setting of "Airespace"
- C. Update the service condition Radws:IETF Called-Stat ion-Id CONTAINS secure-AOM-5007
- D. Remove the service condition Radius:IETF Service-Type BEL0NGS_T0 Login-User (1), 2.8
Answer: C
NEW QUESTION 18
You have configured a Guest SSIO with Captive-portaI Web Authentication and MAC authentication. The MAC caching expiry time set to 12 hours and the Guest Account expiration time is set to 8 hours. What will happen if the guest were to disconnect from the SSID and re-connect 9 hours later?
- A. The client will successfully pass the MAC authentication but still be redirected to captive portal page.
- B. The client will fail to get the MAC Caching role and will be redirected to the captive portal login page
- C. The client will fail the MAC authentication and be denied access to the Guest SSIO.
- D. The client will successfully pass the mac authentication until the mac caching time expires.
Answer: A
NEW QUESTION 19
You have designed a ClearPass solution for an Information Technology Business Park with 50,377 concurrent sessions including the visitors. The deployment includes eight ClearPass servers handling RADIUS authentication. Guest Self-Registration. Onboard and OnGuard. CPPM1 is acting as Publisher. CPPM2 to CPPM8 are added as subscriber nodes CPPM4 is the designated Standby Publisher. Servers CPPM2 and CPPM3 will be handling the Guest and Onboard HTTPS traffic. On a few devices, Corporate users will perform username and password based authentication with Active Directory accounts and on few devices, they will be using private CA signed TLS certificates to do the authentication The customer has three Active Directories (AD1, AD2 and A03) part of Multi-Domain Forest. To provide authentication redundancy, the customer has configured multiple Virtual IP settings between ClearPass servers in a cluster.
On all the Network Access Devices (NAD), the primary authentication server is configured as the VIP IP address and the secondary authentication server rs configured as CPPM1 MGMT IP address Based on the information provided, which ClearPass nodes will you join to the AD domain
- A. Join CPPM1. CPPM4 to CPPM8 to the AD1. AD2 and AD3 domains.
- B. Join all the eight ClearPass servers to AD1, AD2 and AD3 domains.
- C. Join CPPM2 to CPPM7 ClearPass servers to the AD root domain.
- D. Join CPPM1. CPPM4 to CPPM7 servers to the AD root domain
Answer: A
NEW QUESTION 20
Refer to the exhibit.
Your customer has configured the 802.1 X service enforcement conditions with the Endpoint profiling dat a. When the client connects to the network. ClearPass successfully profiles the client but the client always receives an incorrect enforcement profile The configurations in the Aruba controller are completed correctly What is the cause of the issue?
- A. The enforcement policy conditions configured with profiling data are not correct
- B. The option, use cached roles and posture from previous sessions should be enabled.
- C. The enforcement policy rules evaluation algorithm is not configured correctly.
- D. An additional authorization source should be configured for profiling to work.
Answer: B
NEW QUESTION 21
Refer to the exhibit.
A customer has configured Onboard in a cluster with two nodes. All devices were onboarded in the network through node1 but those clients fail to authenticate through node2 with the error shown What steps would you suggest to make provisioning and authentication work across the entire cluster? (Select three)
- A. Configure the Network Settings in Onboard to trust the Policy Manager EAP certificate.
- B. Have all of the BYOO clients disconnect and reconnect to the network.
- C. Make sure that the EAP certificates on both nodes are issued by one common root Certificate Authority (CA).
- D. Configure the Onboard Root CA to trust the Policy Manager EAP certificate root.
Answer: B,C,D
NEW QUESTION 22
Your customer has read about a feature in OnGuard for OnGuard Persistent Agent and Agentless OnGuard that can display a new Posture Results web page to notify that and users with posture results for unhealthy clients after the health check is done. Where do you configure this option?
- A. Policy Manager > Configuration > Enforcement > Profiles > Add a new profiles with Agent Enforcement as the template, and on the Attributes tab add the new Show Posture Results in Guest Page attribute and set the value for the attribute to true.
- B. Policy Manager > Configuration > Enforcement > Profiles > Add new profile with Aruba Radius Enforcement as the template, and on the Attributes tab add the Aruba-User-Role configured with the captive portal profile mapped with default Posture Check web page URL.
- C. Policy Manager > Configuration > Services > Edit the Web-base Health Check Only service, and on the posture tab under Remediation URL add the default Quarantined Blocked web page URL and complete the service configuration by hitting save.
- D. Policy Manager > Configuration > Services > Edit the Web-base Health Check Only service, and on the posture tab enable the checkbox for the new option Show Posture Results in Guest Page and complete the service configuration by hitting save.
Answer: C
NEW QUESTION 23
The customer would like to add a default common self-registration sponsor email under the initial value on all the ten self-registration pages created for different locations except for the guest registration page created for Sunnyvale location to use a different sponsor email in initial value. Under self-registration form fields, you have "Edit" and "Edit Base Field" Which edit options will you choose to make minimal configuration changes to implement the customer's requirement? (Select two)
- A. Update the specific sponsor email by clicking on "Edit Base Field" option of the sponsor_email form filed on the Sunnyvale location register form page
- B. Update the specific sponsor email by clicking on the "Edit" option of the sponsor_email form filed on the Sunnyvale self-registration register form page
- C. Update the common sponsor email by clicking the "Edit" option of the sponsor email form field on the one of the self-registration register form page
- D. Update the sponsor email by clicking on both "Edit" and "Edit Base Field" options of the sponsor_email filed on the Sunnyvale register page
- E. Update the common sponsor email by clicking the "Edit Base Field" option of the sponsor_email form field on the one of the self-registration form page
Answer: C,D
NEW QUESTION 24
A corporate Clear Pass Cluster with two servers located at a single site, has both Management and Data port IP addresses configured. The Management port IPs art in the DataCenter networks subnet, while the Data port IPs are in the DMZ. What is the difference between using one Virtual IP for the AAA traffic versus sending AAA requests to the physical IPs for each server' (Select two.)
- A. One Virtual IP can be used together with the individual server IPs for load balancing.
- B. By using the Virtual IP, the failover wait time is faster than using individual server IPs.
- C. The failover can be accomplished only by using Virtual IP
- D. The Individual IPs can provide failover and load balancing.
- E. Using the one Virtual IP can provide failover.
Answer: B,E
NEW QUESTION 25
Under OnBoard Management and Control, which option will deny the user from re-enrolling one of his devices with Onboard?
View by Certificate >> Click on the device >> Delete certificate
- A. Click on the device >> Revoke certificate >> Revoke this client certificate
- B. Delete this client certificate View by Dev >> Click on the device
- C. Manage Access >> Deny access to this device View by Certificate
- D. View by Username >> Click on the user >> Delete Actions >> Delete all devices
Answer: A
NEW QUESTION 26
Refer to the exhibit.
A customer is doing a new ClearPass installation and is setting up clustering between two ClearPass servers running a 6.8.6 version. The ClearPass server failed to add the subscriber node. The customer was able to login to the console of the ClearPass server with the same CLI password used during the cluster setup. The customer has sent you the screenshots seeking your support Why did an attempt to add a subscriber node failed showing that error?
- A. The data and time in the subscriber was not synchronized with the NTP server
- B. The default database certificate used in the publisher server is not a valid certificate
- C. The subscriber server is running with a default self -signed HTTPS certificate
- D. The subscriber server is running with a public signed and trusted HTTPS certificate
Answer: C
NEW QUESTION 27
Refer to the exhibit.
A customer has just configured a Posture Policy and the T 2 -Health check Service. Next they installed the OnGuard Agent on a test client connected to the Secure_Employee SSID. When they check Access Tracker they see many WEBAUTH requests are being triggered What could be the reason'
- A. TCP port 6658 is not allowed between the client and the ClearPass server.
- B. OnGuard Web-Based Health Check interval has been configured to three minutes.
- C. The OnGuard Agent trigger the events based on changing the Health Status.
- D. The OnGuard Agent is connecting to the Data Port interface on ClearPass.
Answer: B
NEW QUESTION 28
Refer to the exhibit.
The users connecting to a wireless SSIO "secure-HS-5007" were being processed by an incorrect 802.1 X service created for VIP access and the user gets deny access. The customer has sent you the screenshot to get your support to resolve the issue What changes will you suggest to fix it?
- A. In the HS_Building 802.1X service, remove the service rule condition with Aruba controller location name and leave it in same position
- B. In the HSBuilding 802. IXservice. change the Authentication method for AMCAuth for VIP access and leave it in same position
- C. To the HS_Building 802.1 X service, add another service rule condition with VIP access Aruba-Essid-Name and leave it in same position
- D. Delete the HSBuilding 802 IX service, odd VIP access Aruba-Essid-Name as fourth condition to WSBuilding Aruba 802 1X service
Answer: A
NEW QUESTION 29
Refer to the exhibit.
You have integrated the Cisco switch with ClearPass to do MAC-Auth for Cisco IP Phones. The phones connect to the network successfully but when you try to change the status of the device from the access tracker, you see only the ArubaOS Radius terminate session options and not the Cisco vendor terminate session options. What will you check to fix this issue?
- A. Verify that Cisco is chosen as the vendor name while adding the Cisco Switch under network devices.
- B. Verify if the Cisco IP Phone is actively connected to the switch to get the Cisco CoA options from ClearPass.
- C. Verify if the Enable RADIUS Dynamic Authorization option is checked for the Cisco switch added under the network devices.
- D. Verify if the ClearPass supports RADIUS Dynamic Authorization for the Cisco IP Phones doing MAC.AUTH.
Answer: A
NEW QUESTION 30
Refer to the exhibit.
You have set up a home lab for ACCX exam preparation with Aruba Clear Pass integrated with Aruba Controller and Instant Access Point Guest Mac Caching functionality is configured only for Aruba Controller's guest SSID and a common Web Login page is configured for both NAD devices You tested and verified the mac caching functionality for a client by connecting it to the Aruba Controller's guest SSID.
What will happen when you disconnect the client from Aruba Controller's guest SSID and connect it to Instant APs guest SSID?
- A. The client will fail the mac authentication and will be redirected to the captive portal page.
- B. The client does not have to complete any authentication as the re-connection was immediate.
- C. The client will bypass the captive portal authentication by completing the MAC authentication.
- D. The client will be redirected to the captive portal page to complete the web authentication.
Answer: C
NEW QUESTION 31
A customer has multiple Aruba Controllers integrated with ClearPass for guest access using a controller-initialed login method. The customer is aware that a public CA-signed captive portal certificate is required in Aruba controllers for controller-initiated workflows. The customer has purchased unique public CA-signed server certificates for each controller.
What configuration steps would you suggest to the customer to complete the deployment? (Select three.)
- A. Edit the HTML header in the weblogin/ self-registration register page with a script to match the controllers IP and captive portal certificate CN names respectively.
- B. From the Aruba controller, enable the option "Add switch IP address in the redirection URL" under the respective L3 Authentication profile mapped in the initial role
- C. From the weblogin/ self-registration page NAS Vendor settings, enable the check box for "The controller will send the IP to submit credentials" under Dynamic address.
- D. Add all the controller IP address and its certificate common names in the DNS server's Forward Lookup Zones and Reverse Lookup Zones to resolve queries from client.
- E. From the Aruba controller, enable the option 'Add switch ip address in the redirection URL' under the respective guest AAA profile mapped in the VAP profile.
- F. From the weblogin/ self-registration page Login form settings, enable the check box for "The controller will send the IP to submit credentials" under Dynamic address.
Answer: C,E,F
NEW QUESTION 32
Refer to the exhibit.
A customer hat configured the Aruba Controller for administrative authentication using ClearPass as A TACAC5 serve' During tasting, the read-only user is getting the root access role What could be a possible reason for this behavior? (Select two.)
- A. The read-only enforcement profile is mapped to the root role
- B. On the Controller, the TACACS authentication server is not configured for Session authorization
- C. The Controller's Admin Authentication Options Default role is mapped to root
- D. The Controller Sarver Group Hatch Rules are changing the user role.
- E. The ClearPass user role associated to the read-only user is wrong.
Answer: C,E
NEW QUESTION 33
A customer has created a Guest Self-Registration page that they would like to use it as 'template' for all the new pages that are going to be created from now on. Their goal is to ensure that the header and footer on every page are the same, and any edits made to them are automatically reflected on every Self-Registration Page.
What should be configured in order to accomplish this request?
- A. Save this "template" page as a new Skin to be used on other Self-Registration pages.
- B. Create child pages when creating new Self-Registration pages and select the "template" as Parent.
- C. Copy the "template" page and edit it each time a new Self-Registration Page is needed.
- D. Save the "template" page as Master Self'Registration page.
Answer: D
NEW QUESTION 34
......
HP HPE6-A81 Official Cert Guide PDF: https://troytec.getvalidtest.com/HPE6-A81-brain-dumps.html