Best S1000-007 Exam Dumps for the Preparation of Latest Exam Questions
S1000-007 Actual Questions 100% Same Braindumps with Actual Exam!
NEW QUESTION # 44
An administrator starts an AIX LPAR and wants to monitor the boot process using the HMC console.
Which command in HMC SSH session lists all managed systems, LPARs on them and offers an easy way to open a console window to an AIX LPAR?
- A. lssyscfg
- B. mkvterm
- C. vtmenu
- D. lsrefcode
Answer: A
Explanation:
According to the IBM AIX v7 Administrator Specialty Study Guide, the lssyscfg command is used to display detailed information about a system configuration. It can also be used to open a virtual terminal session to an AIX LPAR.
NEW QUESTION # 45
An AIX administrator needs to upgrade from AIX 7100-05-07 to 7200-05-02, which method should they use?
- A. Migration Install
- B. Preservation Install
- C. Update Install
- D. New and Complete Overwrite Install
Answer: A
Explanation:
To upgrade from one release of AIX to another (such as from AIX 7.1 to AIX 7.2), the recommended method is a Migration Install. This method allows the administrator to upgrade the operating system while preserving existing data and settings. It updates the existing AIX installation to the new version, ensuring compatibility and continuity of system configurations and installed applications. The other methods, such as Preservation Install, New and Complete Overwrite Install, and Update Install, are either not suitable for upgrading to a new release or would result in data loss or incomplete updates.References:= IBM AIX Documentation
NEW QUESTION # 46
While trying to extend a file system named /work an administrator receives the following error. 0516-787 extendlv: Maximum allocation for logical volume fslv00 is 256.
What must be done to allow the file system to be extended?
- A. Increase the volume group's maximum limit of logical partitions per logical volume.
- B. Change the logical volume type to jfs2 as JFS logical volumes cannot extend past 256.
- C. Increase the setting for maximum number of logical partitions for that logical volume.
- D. Change the file system's maximum capacity.
Answer: C
Explanation:
This error indicates that the maximum number of logical partitions for the logical volume is set to 256 and needs to be increased in order to allow the file system to be extended. From the IBM AIX v7 Administrator Specialty Study Guide: "The 0516-787 error indicates that the maximum number of logical partitions for the logical volume is set to 256, and needs to be increased in order to allow the file system to be extended."
NEW QUESTION # 47
A system administrator has noticed that static routes are missing after rebooting a system. What is the most likely reason for this?
- A. The administrator has failed to configure the routes with the route add command.
- B. The administrator has failed to run the cfgmgr command before rebooting the systems.
- C. The administrator has failed to configure the routes in the lo0 device with the chdev command.
- D. The administrator has failed to configure the routes in the inet0 device with the chdev command.
Answer: D
NEW QUESTION # 48
An administrator starts an AIX LPAR and wants to monitor the boot process using the HMC console.
Which command in HMC SSH session lists all managed systems, LPARs on them and offers an easy way to open a console window to an AIX LPAR?
- A. lssyscfg
- B. mkvterm
- C. lsrefcode
- D. vtmenu
Answer: D
Explanation:
Thevtmenucommand in an HMC SSH session is used to display a menu of all managed systems and their LPARs. This menu provides options to open virtual terminal sessions to these LPARs, making it easy for administrators to monitor the boot process and manage their AIX partitions. Other commands likemkvtermopen a console for a specific partition, butvtmenuis designed to list all and provide an interface for selection.References: IBM HMC Documentation
NEW QUESTION # 49
A client is running multiple AIX, IBM i and Linux partitions on an IBM Power E980 system. Which command allows the administrator to check the number of processors, amount of memory, and list the devices on the AIX partition?
- A. Iparstat -i
- B. prtconf
- C. syssnap -gc
- D. lsdev
Answer: B
Explanation:
This command displays system configuration information, including the number of processors, amount of memory, and list of devices on the AIX partition. This command is part of the AIX Operating System, and is documented in the IBM AIX v7 Administrator Specialty Study Guide. More information on this command can be found at https://www.ibm.com/support/knowledgecenter/en/ssw_aix_72/com.ibm.aix.cmds3/prtconf.htm.
NEW QUESTION # 50
Which command lists filesets that are below AIX V7.2 technology level 4?
- A. instfix -i I grep -v 7200-04
- B. lslpp -s -1 7200-04
- C. oslevel -r -1 7200-04
- D. lppchk: -L -F "fileset level" I grep -v "7200-04"
Answer: A
NEW QUESTION # 51
An administrator checks the IBM Fix Level Recommendation Tool (FLRT) for their system to see if they need to update IBM firmware or software.
The tool asks for their current system firmware level. How can the administrator confirm what it is?
- A. run lsattr -1 firmware0
- B. run lscfg -vl sys0
- C. run lsmcode -A
- D. run lsattr -El sys0 Igrep mcode
Answer: C
Explanation:
According to the IBM AIX v7 Administrator Specialty Study Guide, the lsmcode command is used to list the microcode of the system. The -A flag is used to list the microcode level and the active microcode level of the system. This command can be used to confirm the system firmware level which is required to use the IBM Fix Level Recommendation Tool (FLRT).
NEW QUESTION # 52
One morning the application owner needed to urgently transfer some files using FTP from Development Dev_DB_Server to the production server - DB_Server, but is receiving the following error:
connect: Connection refused
Note: DB_Server-cannot be shutdown during business hours.
Checking the setup of DB_Serrver, the administrator finds the following entries in /etc/inetd.conf
The administrator also, finds the file /etc/ftpaccess . ctl doesn't exit.
Which two methods can be used to allow files to be transferred to DB Server using FTP?
- A. On DB_Server run command startsrc -t ftp.
- B. On DB_Server uncomment line starting with "#f tp" in /etc/inetd.conf and reboot.
- C. On DB_Server uncomment line starting with "#ftp" and run refresh -s inetd.
- D. On DBServer run the command /usr/sbin/f tpd.
- E. On DBServer run command startsrc -s ftpd and create /etc/ftpaccess-ctl with line "allow: *".
Answer: B,C
Explanation:
To enable FTP file transfer on DB_Server, the administrator should uncomment the line starting with#ftpin the/etc/inetd.conffile and then runrefresh -s inetd. Uncommenting the line ininetd.confwill enable the FTP service, and running therefreshcommand will apply the changes without requiring a reboot.References:= IBM AIX Network Services Documentation
NEW QUESTION # 53
When a user logs in. the processing of their .profile is very slow. Which issue could contribute to the problem?
- A. Network issues between the user location and the system.
- B. The user's home file system is full.
- C. The PATH variable contains non-existent directories.
- D. A slow NFS mount for their home directory.
Answer: C
Explanation:
When a user logs in, the system will process their .profile file which contains the PATH variable. This variable specifies the list of directories that the system will search through to locate executable files. If the PATH variable contains non-existent directories, then it will take longer for the system to process the .profile file, resulting in a slower login experience. Reference: IBM AIX v7 Administrator Specialty Study Guide (page 9-10).
NEW QUESTION # 54
An administrator encountered a problem creating a mksysb backup image on a system.
To investigate the problem further, the following information was collected
Based on this information, why has the creation of the mksysb backup image failed?
- A. There is insufficient free space in /tmp.
- B. The rootvg contains a raw logical volume named rawIvOO.
- C. The command mksysb will fail if there is a mix of JFS and JFS2 filesystems.
- D. The system has NFS file systems mounted.
Answer: A
Explanation:
The creation of themksysbbackup image has failed due to insufficient free space in/tmp. Themksysbcommand requires sufficient space in the/tmpdirectory to create temporary files during the backup process. If there is not enough free space, the backup process will fail.References:= IBM AIX Backup and Recovery Documentation
NEW QUESTION # 55
Which command will show when a file was last accessed?
- A. fsdb file
- B. Is -1 file
- C. istat file
- D. who -f file
Answer: C
Explanation:
The istat command displays information about the inode of a file, including the last access time. This command is available on IBM AIX v7 systems and is documented in the IBM AIX v7 Administrator Specialty Study Guide. The syntax for the command is "istat file", where 'file' is the path to the file you would like to check. For more information, please see the IBM documentation at https://www.ibm.com/support/knowledgecenter/ssw_aix_72/com.ibm.aix.cmds2/istat.htm.
Theistatcommand in AIX provides detailed information about a file's inode, including the last access time, modification time, and change time. This command is useful for administrators who need to track file usage and access patterns. By runningistat file, one can see when a file was last accessed.References: IBM AIX Documentation - istat
NEW QUESTION # 56
A system administrator includes the values RES TIMEOUT=1 and RES_RETRY=1 in the /etc/environment file. What is the effect of this change?
- A. It avoids NFS mounts appearing to be hung or stalled indefinitely when there are network outages.
- B. It reduces the failover time to the secondary name server when the first name server is not reachable.
- C. It causes ssh connections to disconnect after 1 minute of no activity.
- D. It reduces the failover time to the secondary NTP Server when the first NTP Server is unavailable.
Answer: A
NEW QUESTION # 57
A system administrator needs information about the space reclamation requests generated by LVM. Which command is required to obtain this information?
- A. Isvg
- B. Ivmstat
- C. iostat
- D. reclstat
Answer: D
Explanation:
Thereclstatcommand is used to obtain information about the space reclamation requests generated by the Logical Volume Manager (LVM). This command provides details on space reclamation activities, helping administrators manage and optimize disk space utilization.References:= IBM AIX reclstat Command Documentation
NEW QUESTION # 58
What AIX feature will allow data to be mirrored to a remote site?
- A. Remote Volume Groups
- B. Geographic Logical Volume Manager
- C. Mirror Pools
- D. Asynchronous Dispersed Logical Volumes
Answer: B
NEW QUESTION # 59
......
IBM S1000-007 exam covers a wide range of topics related to AIX v7, including system configuration and management, kernel customization, system performance and tuning, network security, and user management. It also covers advanced topics such as virtualization, logical partitioning, and high availability solutions. S1000-007 exam is delivered in a proctored environment and consists of 49 multiple-choice questions that need to be completed within 90 minutes.
S1000-007 Study Material, Preparation Guide and PDF Download: https://troytec.getvalidtest.com/S1000-007-brain-dumps.html