C-TS411-2021 Actual Questions Answers Pass With Real C-TS411-2021 Exam Dumps
C-TS411-2021 Dumps Prepare Your Exam With 82 Questions
SAP C_TS411_2021 Certification Exam is a computer-based exam that consists of 80 multiple-choice questions. The candidate has a maximum of 180 minutes to complete the exam, and the passing score is 64%. C-TS411-2021 exam is available in English, German, French, Spanish, Portuguese, Japanese, Chinese, and Korean.
NEW QUESTION # 19
What is the central element of the document key?
- A. Document version
- B. Document number
- C. Document type
- D. Document part
Answer: C
NEW QUESTION # 20
Which of the following objects can you connect with a revision level?Note: There are 2 correct Answers to this question.
- A. Document
- B. Classes
- C. Work Center
- D. Material Master
Answer: A,D
NEW QUESTION # 21
Which scenario is possible when you create plant specific data with the Product Master app?
- A. You can define multiple plant information outside Product Master.
- B. You can define multiple plant information inside Product Master.
- C. You can only define one plant information outside Product Master.
- D. You can only define one plant information inside Product Master.
Answer: B
NEW QUESTION # 22
For which applications can you define formulas inside a Work Center?Note: There are 3 correct Answers to this question.
- A. Capacities
- B. Costing
- C. Hierarchy
- D. Scheduling
- E. HR assignment
Answer: A,B,D
NEW QUESTION # 23
The value assignment interface for variant configuration can be structured using interface design and characteristic groups.What can be used depending on the processing mode?
- A. You can only use Interface Design for Processing Mode Classic and Characteristic Groups only for Processing Mode AVC.
- B. You can use interface design and characteristic groups for both processing modes.
- C. You can only use Interface Design for Processing Mode AVC and Characteristic Groups for Processing Mode Classic.
- D. You can use interface design for both processing modes, but characteristic groups only for Processing Mode AVC.
Answer: A
NEW QUESTION # 24
When or why do you assign production resources and tools to an operation?
- A. To make additional production resources and tools available that do not belong to the equipment of the Work Center.
- B. To make them available for operation inspection only.
- C. To provide additional components which cannot be assigned to the BOM.
- D. To map the equipment of the Work Center with production resources and tools.
Answer: A
NEW QUESTION # 25
You are working with VC Modeling Environment PMEVC. Complete object dependencies are created by drag & drop of one or more characteristic values into a BOM item.What can be created with this drag & drop functionality?Note: There are 2 correct Answers to this question.
- A. Local and global object dependencies
- B. Local object dependencies only
- C. Selection conditions and procedures
- D. Selection conditions only
Answer: A,C
NEW QUESTION # 26
What is the significance of the Additional Data tab in class maintenance?
- A. It exists for all class types. It controls the permitted object types.
- B. It only exists for class nodes. It controls the usage in routings.
- C. It only exists for class nodes. It controls the usage in BOMs.
- D. It only exists for variant classes. It controls the use in configuration profiles.
Answer: C
NEW QUESTION # 27
Which configuration process/scenario do you use for an Engineer To Order process?
- A. Sales Order (SET)
- B. Planned/Production Order
- C. Engineering Order
- D. Order BOM
Answer: D
NEW QUESTION # 28
To which object of a Task List can you directly assign production resources/tools?
- A. Material assignments
- B. Operations
- C. Headers
- D. Sequences
Answer: B
NEW QUESTION # 29
What do you have to keep in mind when overwriting characteristic for a specific class?
- A. The status of this characteristic is automatically set to incomplete.
- B. This change applies only to the characteristic, when it is used in this class.
- C. This change applies only to the characteristic, when it is used in every class.
- D. The status of this characteristic is automatically set to locked.
Answer: B
NEW QUESTION # 30
What do you have to keep in mind when working with value hierarchies?Note: There are 2 correct Answers to this question.
- A. Only available for characteristics with CHAR format.
- B. Value nodes are not values.
- C. Value nodes are values.
- D. Only available for characteristics with CHAR or NUM format.
Answer: A,B
NEW QUESTION # 31
Which routing objects can object dependencies be assigned to?Note: There are 3 correct Answers to this question.
- A. Component Allocation
- B. Operations
- C. Production Resource Tools
- D. Sequences
- E. Inspection Characteristics
Answer: B,C,D
NEW QUESTION # 32
Which material types are used for configurable material masters?Note: There are 2 correct Answers to this question.
- A. Each material type can be used in standard customizing for configurable material masters.
- B. Material types KMAT, HALB, and FERT - configurable materials can only be created with these material types.
- C. Material type KMAT - each material master of this material type can be configured in a fixed way.
- D. Material type KMAT - configurable materials can only be created with this material type.
Answer: A,D
NEW QUESTION # 33
You work with cross-plant and plant-specific Product Master statuses. Which status has the highest priority?
- A. The plant-plant specific status.
- B. The cross-plant status.
- C. The most restrictive status.
- D. The least restrictive status.
Answer: B
NEW QUESTION # 34
The processing mode is set in the configuration profile and in the object dependencies. What needs to be taken into account?Note: There are 3 correct Answers to this question.
- A. The processing mode of object dependencies assigned to characteristics and characteristic values must be the same as that of the configuration profile.
- B. The processing mode of dependencies assigned to characteristics and characteristic values must always be "Advanced Variant Configuration" (independent of the configuration profile).
- C. The processing mode of object dependencies assigned to the configuration profile must be the same as that of the configuration profile.
- D. The processing mode of object dependencies assigned to BOM and routing must always be "Classic" (independent of the configuration profile).
- E. The processing mode of object dependencies assigned to BOM and routing must be the same as that of the configuration profile.
Answer: A,C,E
NEW QUESTION # 35
You want to use a procedure to set a value in a single-level configuration using a variant table T1.Variant table T1 has only two characteristics C1 and C2. C1 is a key field.The following syntax is incorrect: table T1 (C1 = C1, C2 = C2)Where do you have to insert $self?
- A. table T1 (C1 = C1, $self.C2 = C2)
- B. table T1 (C1 = $self.C1, C2 = C2)
- C. table T1 ($self.C1 = C1, C2 = C2)
- D. table T1 (C1 = C1, C2 = $self.C2)
Answer: D
NEW QUESTION # 36
You can assign material components to operations.What needs to be taken into account?
- A. You can only assign each material component, when the material master exists and is known in the plant.
- B. You can only assign material components that have also been assigned to the routing as production resources and tools.
- C. You can only assign material components that were previously assigned to the header material.
- D. You can only assign material components that are components of a material BOM.
Answer: B
NEW QUESTION # 37
For which configuration processes/scenarios can you also do a multi-level configuration in sales orders, if there are no sales-relevant items in the BOM available?Note: There are 2 correct Answers to this question.
- A. Planned/Production Order without BOM explosion
- B. Order BOM
- C. Planned/Production Order with BOM explosion
- D. Sales Order (SET processing)
Answer: B,C
NEW QUESTION # 38
Which data base tables use the Product Master?
- A. Tables for Master Data Management.
- B. Tables only for Product Master.
- C. Tables for Product Master and Material Master.
- D. Tables only for Material Master.
Answer: D
NEW QUESTION # 39
What is a clear indicator of having local object dependencies?
- A. Name
- B. Status
- C. Administrative data
- D. Syntax
Answer: B
NEW QUESTION # 40
Which secure storage areas can be used inside a document info record?Note: There are 2 correct Answers to this question.
- A. SAP Database
- B. FTP File Server
- C. HTTP Content Server
- D. RFC Archive
Answer: A,C
NEW QUESTION # 41
A user releases a document info record with a change number. What effect does this action have on the document info record?Note: There are 2 correct Answers to this question.
- A. All document fields are locked.
- B. The document displays the release key of the change number.
- C. The document info record uses the validity of a change number.
- D. The document gets a revision level.
Answer: C,D
NEW QUESTION # 42
......
New C-TS411-2021 Dumps - Real SAP Exam Questions: https://troytec.getvalidtest.com/C-TS411-2021-brain-dumps.html