Juniper JN0-636 Dumps - 100% Cover Real Exam Questions (Updated 94 Questions)
Real JN0-636 dumps - Real Juniper dumps PDF
NEW QUESTION 29
Exhibit
Referring to the exhibit, which three statements are true? (Choose three.)
- A. The packet originated within the Trust zone.
- B. The packet's destination is to an interface on the SRX Series device.
- C. The packet is dropped before making an SSH connection.
- D. The packet's destination is to a server in the DMZ zone.
- E. The packet is allowed to make an SSH connection.
Answer: A,B,C
NEW QUESTION 30
Exhibit
You have configured the SRX Series device to switch packets for multiple directly connected hosts that are within the same broadcast domain However, the traffic between two hosts in the same broadcast domain are not matching any security policies Referring to the exhibit, what should you do to solve this problem?
- A. You must change the global mode to security bridging mode
- B. You must change the global mode to security switching mode.
- C. You must change the global mode to switching mode.
- D. You must change the global mode to transparent bridge mode.
Answer: A
NEW QUESTION 31
What are two important function of the Juniper Networks ATP appliance solution? (Choose two.).
- A. Filtration
- B. Analysis
- C. Detection
- D. Statistics
Answer: B,C
Explanation:
https://www.juniper.net/us/en/products-services/security/advanced-threat-prevention/
NEW QUESTION 32
You are asked to detect domain generation algorithms
Which two steps will accomplish this goal on an SRX Series firewall? (Choose two.)
- A. Define an advanced-anti-malware policy under [edit services].
- B. Attach the security-metadata-streaming policy to a security
- C. Attach the advanced-anti-malware policy to a security policy.
- D. Define a security-metadata-streaming policy under [edit
Answer: A,C
NEW QUESTION 33
You are asked to allocate security profile resources to the interconnect logical system for it to work properly.
In this scenario, which statement is correct?
- A. The resources must be calculated based on the amount of traffic that will flow between the logical systems.
- B. The flow-session resource must be defined in the security profile for the interconnect logical system.
- C. No resources are needed to be allocated to the interconnect logical system.
- D. The NAT resources must be defined in the security profile for the interconnect logical system.
Answer: A
NEW QUESTION 34
Exhibit
The highlighted incident (arrow) shown in the exhibit shows a progression level of "Download" in the kill chain.
What are two appropriate mitigation actions for the selected incident? (Choose two.)
- A. Immediate response required: Wipe infected endpoint hosts.
- B. Not an urgent action: Use IVP to confirm if machine is infected.
- C. Immediate response required: Block malware IP addresses (download server or CnC server)
- D. Immediate response required: Deploy IVP integration (if configured) to confirm if the endpoint has executed the malware and is infected.
Answer: A,B
NEW QUESTION 35
Your company wants to use the Juniper Seclntel feeds to block access to known command and control servers, but they do not want to use Security Director to manage the feeds.
Which two Juniper devices work in this situation? (Choose two)
- A. QFX Series devices
- B. EX Series devices
- C. SRX Series devices
- D. MX Series devices
Answer: A
NEW QUESTION 36
You have a webserver and a DNS server residing in the same internal DMZ subnet. The public Static NAT addresses for the servers are in the same subnet as the SRX Series devices internet-facing interface. You implement DNS doctoring to ensure remote users can access the webserver.Which two statements are true in this scenario? (Choose two.)
- A. The DNS doctoring ALG is not enabled by default.
- B. The DNS doctoring ALG is enabled by default.
- C. The Proxy ARP feature must be configured.
- D. The DNS CNAME record is translated.
Answer: B,C
NEW QUESTION 37
You want to configure a threat prevention policy.
Which three profiles are configurable in this scenario? (Choose three.)
- A. device profile
- B. infected host profile
- C. malware profile
- D. C&C profile
- E. SSL proxy profile
Answer: A,B,E
NEW QUESTION 38
Exhibit.
Referring to the exhibit, a spoke member of an ADVPN is not functioning correctly.
Which two commands will solve this problem? (Choose two.)
- A. [edit security ike gateway advpn-gateway]
user@srx# delete advpn partner - B. [edit interfaces]
user@srx# delete st0.0 multipoint - C. [edit security ike gateway advpn-gateway]
user@srx# set version v1-only - D. [edit security ike gateway advpn-gateway]
user@srx# set advpn suggester disable
Answer: A,D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-auto-discovery-vpns.html
NEW QUESTION 39
Exhibit
Referring to the exhibit, which statement is true?
- A. This custom block list feed will be used after the Juniper Seclntel block list feed.
- B. This custom block list feed cannot be saved if the Juniper Seclntel block list feed is configured.
- C. This custom block list feed will be used before the Juniper Seclntel
- D. This custom block list feed will be used instead of the Juniper Seclntel block list feed
Answer: A
NEW QUESTION 40
You are asked to provide single sign-on (SSO) to Juniper ATP Cloud. Which two steps accomplish this goal? (Choose two.)
- A. Configure Microsoft Azure as the service provider (SP).
- B. Configure Juniper ATP Cloud as the service provider (SP).
- C. Configure Microsoft Azure as the identity provider (IdP).
- D. Configure Juniper ATP Cloud as the identity provider (IdP).
Answer: A,C
NEW QUESTION 41
All interfaces involved in transparent mode are configured with which protocol family?
- A. bridge
- B. inet
- C. mpls
- D. ethernet - switching
Answer: C
NEW QUESTION 42
Your Source NAT implementation uses an address pool that contains multiple IPv4 addresses Your users report that when they establish more than one session with an external application, they are prompted to authenticate multiple times External hosts must not be able to establish sessions with internal network hosts What will solve this problem?
- A. Enable persistent NAT
- B. Enable address persistence.
- C. Disable PAT.
- D. Enable destination NAT.
Answer: A
NEW QUESTION 43
Exhibit
You have configured the SRX Series device to switch packets for multiple directly connected hosts that are within the same broadcast domain However, the traffic between two hosts in the same broadcast domain are not matching any security policies Referring to the exhibit, what should you do to solve this problem?
- A. You must change the global mode to security bridging mode
- B. You must change the global mode to security switching mode.
- C. You must change the global mode to switching mode.
- D. You must change the global mode to transparent bridge mode.
Answer: A
NEW QUESTION 44
While troubleshooting security policies, you added the count action. Where do you see the result of this action?
- A. In the show security policies detail command output.
- B. In the show security flow statistics command output.
- C. In the show firewall log command output.
- D. In the show security policies hit-count command output.
Answer: C
NEW QUESTION 45
Exhibit
You have recently configured Adaptive Threat Profiling and notice 20 IP address entries in the monitoring section of the Juniper ATP Cloud portal that do not match the number of entries locally on the SRX Series device, as shown in the exhibit.
What is the correct action to solve this problem on the SRX device?
- A. Flush the DNS cache on the SRX device.
- B. You must configure the DAE in a security policy on the SRX device.
- C. Refresh the feed in ATP Cloud.
- D. Force a manual download of the Proxy__Nodes feed.
Answer: A
NEW QUESTION 46
The monitor traffic interface command is being used to capture the packets destined to and the from the SRX Series device.
In this scenario, which two statements related to the feature are true? (Choose two.)
- A. This feature does not capture transit traffic.
- B. This feature captures ICMP traffic to and from the SRX Series device.
- C. This feature is supported on high-end SRX Series devices only.
- D. This feature is supported on both branch and high-end SRX Series devices.
Answer: A,D
Explanation:
https://forums.juniper.net/t5/Ethernet-Switching/monitor-traffic-interface/td-p/462528
NEW QUESTION 47
To analyze and detect malware, Juniper ATP Cloud performs which two functions? (Choose two.)
- A. antivirus scan: with a single vendor solution to see if the file contains any potential threats
- B. cache lookup: to see if the file is seen already and known to be malicious
- C. dynamic analysis: to see what happens if you execute the file in a real environment
- D. static analysis: to see what happens if you execute the file in a real environment
Answer: A,D
NEW QUESTION 48
Exhibit
You are implementing filter-based forwarding to send traffic from the 172.25.0.0/24 network through ISP-1 while sending all other traffic through your connection to ISP-2. Your ge-0/0/1 interface connects to two networks, including the 172.25.0.0/24 network. You have implemented the configuration shown in the exhibit. The traffic from the 172.25.0.0/24 network is being forwarded as expected to 172.20.0.2, however traffic from the other network (172.25.1.0/24) is not being forwarded to the upstream 172.21.0.2 neighbor.
In this scenario, which action will solve this problem?
- A. You must add another term to the firewall filter to accept the traffic from the 172.25.1.0/24 network.
- B. You must specify that the 172.25.1.1/24 IP address is the primary address on the ge-0/0/1 interface.
- C. You must apply the firewall filter to the lo0 interface when using filter-based forwarding.
- D. You must create the static default route to neighbor 172.21 0.2 under the ISP-1 routing instance hierarchy.
Answer: D
NEW QUESTION 49
Exhibit
You are using traceoptions to verify NAT session information on your SRX Series device. Referring to the exhibit, which two statements are correct? (Choose two.)
- A. This is the first packet in the session.
- B. The SRX Series device is performing only source NAT on this session.
- C. The SRX Series device is performing both source and destination NAT on this session.
- D. This is the last packet in the session.
Answer: C,D
NEW QUESTION 50
Exhibit
You configure Source NAT using a pool of addresses that are in the same subnet range as the external ge-0/0/0 interface on your vSRX device. Traffic that is exiting the internal network can reach external destinations, but the return traffic is being dropped by the service provider router.
Referring to the exhibit, what must be enabled on the vSRX device to solve this problem?
- A. Persistent NAT
- B. Proxy ARP
- C. DNS Doctoring
- D. STUN
Answer: C
NEW QUESTION 51
Exhibit
Which two statements are correct about the output shown in the exhibit? (Choose two.)
- A. The packet matches a configured security policy.
- B. The packet is processed as host inbound traffic.
- C. The packet is processed in the first path packet flow.
- D. The packet matches the default security policy.
Answer: B,D
NEW QUESTION 52
......
Juniper JN0-636 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
Realistic GetValidTest JN0-636 Dumps PDF - 100% Passing Guarantee: https://troytec.getvalidtest.com/JN0-636-brain-dumps.html